In-Ground Micro luminaires
The less maintenance and the feature that it may not cause any undue incident if touched makes the HARRIER In-ground luminaires the ideal choice for usage in parks and other places where a lot of public is expected. Wet locations can prefer these types of lights as they have a very good insulated casing that provides safety. Further the coatings on these components prevents them from rough wear and tear. They can have their sheen even under heavy weather conditions as they are made of high quality materials. The simple and elegant design offers a gracious look that emanates ambient light without any harshness.
MICROLED / MINILED are a tiny IP67 LED fitting suitable
for in-ground, wall recessed and walkover for both
indoor & outdoor usgae like drive way, nice of facade for highlightig the wall, Landscapes, Architectural elements.. Small dimension with flush
mounting installation. It is equipped with a screwless
round front ring in STAINLESS STEEL. These fixtures are
perfect for creating very defined effects of accent light.
On request, these luminaires are also availalaible in RGB colors
range availaible in symmetrical, clear, asymmetrical
TECHNICAL SPECIFICATIONS
Luminaire Structure
– Die-cast aluminium housing
– Pre-treated before powder coating ensuring high corrosion resistance
– 6 mm thick front ring in grade 316 stainless steel or aluminium
– Single cable entry, through wiring upon request
– One cable gland supplied with 1 m of 3×1.0 sqmm outdoor cable for HA-60036, HA-60037, HA-60049, HA-60196, HA-60197, HA-60209, HA-60295, HA-60296, HA-60305, HA-60306
– One IP68 connector to use with outside diameter cable of 6.0 mm to 10.0 mm needs to be supplied by the customer for HA-60036, HA-60037, HA-60049, HA-60196, HA-60197, HA-60209, HA-60295, HA-60296, HA-60305, HA-60306
– Stainless steel fasteners in grade 304 with zinc flake coating (ZFC)
– Durable silicone rubber gasket
– High-efficiency PMMA lens
– Clear or frosted toughened glass
– Integral control gear for HA-60036, HA-60037, HA-60049, HA-60050, HA-60196, HA-60197, HA-60209, HA-60215, HA-60295, HA-60296, HA-60305, HA-60306
– Remote driver, remote box IP-rated and recessing box is included for HA-60385, HA-60386, HA-60395, HA-60396
– Recessing box in high-density polyethylene is included
– Suitable for walk-over with a maximum load of 200 kg
range – 1w/3w
beam angle-8°/24°/40°40°
Beam Angle
dimension – 1w- Ø39 x 67
dimension 3w- Ø34 x 62
5w
beam angle – 8/24/40
dimension- Ø39 x 67
1/2/4 way
Luminaire made up of pressure die-cast aluminium.
• Hard chromeplated stainless steel 316 grade front ring.
• Silicone seal gasket.
• Translucent acrylic diffuser.
• Luminaire hard wired with 3 x 0.5mm2 cable of 0.5 metre length.
• Supplied with mounting sleeve for preparing recessed opening in ground or wall.
• Cable entries for through-wiring of mains supply cable.
• Integral constant current power supply
• CRI (Ra) : >80
• Prewired with LED driver and suitable for operating on 240V,50Hz single phase ac supply.
• Ordering guide : KL-4133-CCT (Colour Temperature)
• Available CCT : 2700K,3000K / 4000K,5700K
click here for specification sheet
range
3W LED 2700K,3000K,4000K,5700K, Translucent Acrylic, dimensions- Ø88 x 125mm, model-24135.IES 24135.pdf
24133 3W LED 2700K,3000K,4000K,5700K, Translucent Acrylic Ø88 x 125mm 24133-BA–NW.IES
24133-BA–NW.PDF
24133.pdf
24134 3W LED 2700K,3000K,4000K,5700K, Translucent Acrylic Ø88 x 125mm 24134.IES 24134
for more options click here
9/14/18w range
Key specification
Product Description
• Luminaire made up of die-cast aluminium & Stainless steel.
• Hard chromeplated stainless steel 316 grade front ring.
• Silicone gasket.
• Toughened clear glass.
• Luminaire hard wired with 3 x 0.5mm2 cable of 0.5 metre length.
• Supplied with mounting sleeve for preparing recessed opening in ground.
• Cable entries for through-wiring of mains supply cable.
• Integral constant current power supply
• CRI (Ra) : >80 (90 CRI – On Request)
• Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply.
• Ordering guide : KL-4140-CCT (Colour Temperature)
• Available CCT : 3000K, 4000K, 5700K
Product Benefits
• High luminous efficiency at reduced wattage.
• A sleek and minimalist shape provides distinctive lighting effects for inground and wall architecture.
• Sustainable LED technology offers durability and optimal light output with low power consumption.
Area of Application
Walk ways, Facades, Landscapes, Architectural elements.
Accessory
• Supplied with IP67 rated connector for a secure connection to the network.
• ABS Plastic outer costing for easy installation.
Be the first to review “In-Ground Micro luminaires”
Related products
Bollard
Bollard
Bollard
Bollard
Bollard
Bollard
Bollard
Reviews
There are no reviews yet.